Every peep show establishment must comply with the building and construction requirements of this section, in addition to any other applicable requirements of the <cite data-path="|building-codes">Building, Fire, and Related Codes Article of Baltimore City</cite>. Each booth in which a peep show device is located must be constructed of:not less than 1-hour fire-resistive material; or other materials approved by the Fire Department. Each booth in which a peep show device is located must contain at least 24 square feet. The viewing area must be of a size and arrangement that will assure the inability of more than 1 person to use the device at the same time. The aisles of any room in which a peep show device is located must be at least 36 inches wide. For each room in which a peep show device is located, ingress and egress must be provided by:at least 2 doorways that are each at least 36 inches wide; or 1 doorway that meets all of the requirements of the Baltimore City <cite data-path="|building-codes|II">Building Code</cite> and other ordinances and regulations of the City for 1 exit. Every doorway that provides ingress to a room in which a peep show device is located must remain unlocked during business hours. Every doorway that provides egress from a room in which a peep show device is located must be provided with an internally illuminated exit sign. A light level sufficient to insure clear visibility and to permit patrons to read a newspaper must be maintained in every area of a peep show establishment to which the public is admitted. Ord. 02-475 Ord. 13-093 Ord. 15-427