The report submitted for final stormwater management plan approval must contain the following, minimum information: a brief narrative description of the project; geotechnical investigations, including soil maps, borings, site specific recommendations, and any additional information necessary to evaluate the final stormwater management design; descriptions of all water courses, impoundments, and wetlands on or adjacent to the site or into which stormwater directly flows; drainage area maps that show pre- development and post-development runoff flow path segmentation and land use; hydrologic computations of the applicable environmental site design and unified sizing criteria, according to the State’s Design Manual, for all points of discharge from the site; hydraulic computations for all environmental site design practices and structural stormwater management measures to be used; structural computations; volume sizing computations, according to the State’s Design Manual, that support the final stormwater management design; and any other information that the Department requires. Ord. 02-367 Ord. 10-277