<?xml version='1.0' encoding='utf-8'?>
<baltimore-city-law heading="§ 8-111 Definitions.">
  <section prefix="§" num="8-111" heading="Definitions.">
    <para num="(a)" heading="In general.">The following words and phrases when used within this Part II, unless the context clearly indicates otherwise, shall have the meaning ascribed to them in this section.</para>
    <para num="(b)" heading="Air Monitoring Contractor.">&lt;em&gt;“&lt;/em&gt;Air Monitoring Contractor” means an environmental engineer certified by the City to design, install, operate, and maintain the Continuous Emissions Monitoring Systems required by this Part II.</para>
    <para num="(c)" heading="Commercial solid waste incinerator; Facility.">“Commercial solid waste incinerator” or “facility” means any facility in Baltimore City that produces energy or disposes of waste by combusting a solid fuel or waste, or gases produced on-site from the gasification or pyrolysis of a solid fuel or waste, and that is capable of processing at least 25 tons of solid fuel or waste per day.</para>
    <para num="(d)" heading="Continuous Emissions Monitoring System; CEMS.">
      <para num="(1)" heading="In general.">“Continuous Emissions Monitoring System” or “CEMS” means a pollution monitoring system capable of sampling, conditioning, analyzing, and providing a record of emissions at frequent intervals that meets U.S. Environmental Protection Agency or Maryland Department of the Environment data acquisition and availability requirements.</para>
      <para num="(2)" heading="Sampling frequency.">Except as specified in paragraph (3) of this subsection, the sampling frequency capability sufficient to qualify a system as a CEMS for the purposes of this Part II must at a minimum deliver a monitoring sample:<para num="(i)">once per minute; or</para>
        <para num="(ii)">any lesser frequency of interval, up to no less than once per hour, that provides sufficient data for a direct determination of compliance with all applicable emission limitations imposed by this Part II.</para>
      </para>
      <para num="(3)" heading="Dioxin and furan sampling.">In the case of dioxins and furans, long-term sampling equipment may be used if real-time monitors are not commercially available, so long as  year-round monitoring is still achieved through back-to-back use of long-term monthly samples.</para>
    </para>
    <para num="(e)" />
    <para num="(f)" heading="Solid  fuel; Waste.">&lt;em&gt;“&lt;/em&gt;Solid fuel” or “waste” means any solid waste, discarded material, recyclable materials, sludges, by-products, commercial chemical products, municipal waste, hazardous waste, biomass, processed debris, special medical waste, sterilized special medical waste, sewage sludge, scrap tires, auto shredder residue, refuse-derived fuel, processed engineered fuel, or solid fuel produced from municipal waste.</para>
    <para num="(g)" heading="TEQDF-WHO98.">“TEQ&lt;sub&gt;DF&lt;/sub&gt;-WHO&lt;sub&gt;98&lt;/sub&gt;” means a unit of measurement for dioxins and furans, standardized to toxic equivalents, calculated in accordance with the World Health Organization’s 1998 method.</para>
    <annotation type="History">Ord. 19-232</annotation>
    <annotation type="History">Ord. 22-124</annotation>
    <annotation type="History">Ord. 22-125</annotation>
  </section>
</baltimore-city-law>
