<?xml version='1.0' encoding='utf-8'?>
<section article="gtr" article_name="Transportation" number="24-106.2" title_number="24" title_name="Vehicle Laws -- Size, Weight, and Load; Highway Preservation" subtitle_number="1" subtitle_name="Size, Weight, and Load">
  <level label="a">
    <text>A vehicle or combination of vehicles used to carry piling, poles, mill logs, unfinished or unfabricated lumber, pipe, steel, or other materials of a similar kind, size, shape, or characteristic may not be driven on any highway unless its load is fastened securely to both the front and rear of the vehicle at both the front and rear of the load, as provided in this section.</text>
  </level>
  <level label="b">
    <text>The fastening of a load to a vehicle shall be:</text>
    <level label="1">
      <text>By two separate common coil B.B. chains, the links of which may not be less than:</text>
      <level label="i">
        <text>3/8 of an inch in diameter for loads of 3 tons or less; or</text>
      </level>
      <level label="ii">
        <text>1/2 of an inch in diameter for loads over 3 tons;</text>
      </level>
    </level>
    <level label="2">
      <text>If they have at least as much tensile strength as the chains, by:</text>
      <level label="i">
        <text>Wire rope not less than 5/16 of an inch in diameter;</text>
      </level>
      <level label="ii">
        <text>Steel strapping; or</text>
      </level>
      <level label="iii">
        <text>Logistic webbing of synthetic fibers; or</text>
      </level>
    </level>
    <level label="3">
      <text>As specified in Part 393 of the federal Motor Carrier Safety Regulations and adopted jointly by the Administration and the Department of State Police.</text>
    </level>
  </level>
</section>
