<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".01" citation="COMAR 08.18.33.01" title_num="08" subtitle_num="18" chapter_num="33" heading="Definitions.">
  <paragraph num="A.">
    <text>In this chapter, the following terms have the meanings indicated.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Terms Defined.</text>
    <paragraph num="(1)">
      <text>“Houseboat” means a boat constructed for use as a residence or used principally as a residence.</text>
    </paragraph>
    <paragraph num="(2)">
      <text>“Lake” means the area of pooled water within the watershed of Deep Creek in Garrett County, Maryland, formed by the Penelec dam and the lake bottom.</text>
    </paragraph>
    <paragraph num="(3)">
      <text>Length Overall.</text>
      <paragraph num="(a)">
        <text>“Length overall” means the distance measured in a straight line from the foremost part of the vessel to the aftermost part of the vessel, exclusive of sheer.</text>
      </paragraph>
      <paragraph num="(b)">
        <text>“Length overall” includes integrally formed, molded, or welded components and appendages including but not limited to:</text>
        <paragraph num="(i)">
          <text>Bow pulpits;</text>
        </paragraph>
        <paragraph num="(ii)">
          <text>Swim platforms;</text>
        </paragraph>
        <paragraph num="(iii)">
          <text>Attached structures for propulsion systems; and</text>
        </paragraph>
        <paragraph num="(iv)">
          <text>Structural rub rails installed by the builder.</text>
        </paragraph>
      </paragraph>
      <paragraph num="(c)">
        <text>“Length overall” does not include:</text>
        <paragraph num="(i)">
          <text>Bowsprits;</text>
        </paragraph>
        <paragraph num="(ii)">
          <text>Bumpkins;</text>
        </paragraph>
        <paragraph num="(iii)">
          <text>Rudders;</text>
        </paragraph>
        <paragraph num="(iv)">
          <text>Outboard motors;</text>
        </paragraph>
        <paragraph num="(v)">
          <text>Outdrives;</text>
        </paragraph>
        <paragraph num="(vi)">
          <text>Brackets; or</text>
        </paragraph>
        <paragraph num="(vii)">
          <text>Items, including swim platforms, bolted on or secured to the primary structure.</text>
        </paragraph>
      </paragraph>
    </paragraph>
    <paragraph num="(4)">
      <text>“Penelec” means the Pennsylvania Electric Company.</text>
    </paragraph>
    <paragraph num="(5)">
      <text>“Personal watercraft” means a Class A vessel which:</text>
      <paragraph num="(a)">
        <text>Has an inboard motor using an internal combustion engine powering a water jet pump as its primary source of motive propulsion;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>Is designed with the concept that the operator and passenger ride on the outside surfaces of the vessel as opposed to riding inside the vessel;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>Has the probability that the operator and passenger may, in the normal course of use, fall overboard; and</text>
      </paragraph>
      <paragraph num="(d)">
        <text>Is designed with no open load carrying area which would retain water.</text>
      </paragraph>
    </paragraph>
    <paragraph num="(6)">
      <text>“Specialty prop craft” means a vessel less than 16 feet in length similar in appearance and operation to a personal watercraft, but the primary source of propulsion is a propeller. For the purpose of this chapter, a specialty prop craft is considered a personal watercraft.</text>
    </paragraph>
  </paragraph>
</regulation>