Regulation .06 Identification and State Registration Plates.
Regulation .06 Identification and State Registration Plates.LinkCopy Citation
A.
Information Plate.
(1)
An information plate:
(a)
Is required for each amusement attraction;
(b)
Shall be printed in English; and
(c)
Shall be designed to remain legible for the expected life of the amusement attraction.
(2)
The information plate shall include the following, as applicable:
(a)
Serial number, which is a manufacturer-issued or owner-issued unique identifying number;
(b)
Name of the amusement attraction;
(c)
Manufacturer of the amusement attraction;
(d)
Date of manufacture, which is the month and year of manufacture, as determined by the manufacturer, if known;
(e)
Speed, maximum, minimum, or both, revolutions per minute, feet per second, or miles per hour, as applicable;
(f)
Direction of travel, if the direction of travel is essential to the safe operation of the amusement attraction; and
(g)
Rated capacity.
B.
State Registration Plate.
(1)
The Commissioner shall issue a State registration number and State registration plate to each registered amusement attraction.
(2)
If the registration number is no longer legible, the owner shall notify the Commissioner for issuance of a replacement State registration plate.
C.
Each amusement attraction shall have the information plate and State registration plate firmly attached in a readily visible location on the amusement attraction.
D.
Each individual sweep, carrier, car, tub, seat, train, kart, chair, element, or trampoline shall be individually identified by:
(1)
Numbers (e.g. sweep 1, carrier 2, seat 3); or
(2)
Letters or names (e.g. train B, car C, seat 1); or
(3)
Color if only be used once per attraction (e.g. blue tub, seat 3).