<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".03" citation="COMAR 11.04.17.03" title_num="11" subtitle_num="04" chapter_num="17" heading="Determination of Vehicle Eligibility.">
  <paragraph num="A.">
    <text>A six-axle truck tractor-intermodal semitrailer combination of vehicles carrying manifested international freight as the only load of the vehicle in a single sealed, seagoing container may be eligible if the vehicle does not exceed the following maximum weight and axle spacing limits:</text>
    <paragraph num="(1)">
      <text>22,400 pounds on a single axle;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>44,000 pounds on two consecutive axles at least 4 feet apart;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>60,000 pounds on a tri-axle configuration more than 8 feet apart between the first and last axles of the grouping; and</text>
    </paragraph>
    <paragraph num="(4)">
      <text>A total gross weight of 100,000 pounds for the vehicle and load.</text>
    </paragraph>
  </paragraph>
  <paragraph num="B.">
    <text>Tire manufacturer ratings may not be exceeded.</text>
  </paragraph>
  <paragraph num="C.">
    <text>The intermodal trailer chassis shall have a distance of no less than 36 feet when measured from the kingpin to the center of the rearmost trailer axle.</text>
  </paragraph>
  <paragraph num="D.">
    <text>No load tolerance for gross weight or axle weights shall be applied.</text>
  </paragraph>
</regulation>