<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".14" citation="COMAR 11.13.10.14" title_num="11" subtitle_num="13" chapter_num="10" heading="Reports Required by Manufacturer.">
  <paragraph num="A.">
    <text>The manufacturer shall provide to the Administration:</text>
    <paragraph num="(1)">
      <text>Annually, a certified statement that the manufacturing of the model or type of device originally certified has not been modified or altered in any way to require laboratory retesting;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Annually, an information report detailing:</text>
      <paragraph num="(a)">
        <text>The number of devices with visual or vibration alerts, or both, that have been issued;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>The number of deaf and hard of hearing customers;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>The number of reduced fee interlock units requested by customers;</text>
      </paragraph>
      <paragraph num="(d)">
        <text>The number of reduced fee interlock units provided; and</text>
      </paragraph>
    </paragraph>
    <paragraph num="(3)">
      <text>Annually, a summary of all complaints received and corrective action taken by the manufacturer for each model or type of certified device;</text>
    </paragraph>
    <paragraph num="(4)">
      <text>Semiannually, a report that the ignition interlock devices were checked for proper use and accuracy, detailing any necessary adjustments;</text>
    </paragraph>
    <paragraph num="(5)">
      <text>A report on a device denied certification in another state, whether the denial of certification occurs before or after certification by the Administration; and</text>
    </paragraph>
    <paragraph num="(6)">
      <text>Any other available information upon request.</text>
    </paragraph>
  </paragraph>
  <paragraph num="B.">
    <text>The reports required by §A(2) of this regulation shall be categorized by:</text>
    <paragraph num="(1)">
      <text>Customer error of operation;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Faulty automotive equipment other than the device;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>Apparent misuse or attempts to circumvent the device causing damage; and</text>
    </paragraph>
    <paragraph num="(4)">
      <text>Device failure due to material defect, design defect, or workmanship errors in construction, installation, or calibration.</text>
    </paragraph>
  </paragraph>
  <paragraph num="C.">
    <text>A denial of certification for an ignition interlock model in another state may, at the discretion of the Administrator, be cause for decertification, revocation, or denial of certification for the same model by the Administration in Maryland.</text>
  </paragraph>
  <paragraph num="D.">
    <text>The manufacturer shall provide the Administration and participating agencies the following:</text>
    <paragraph num="(1)">
      <text>Proof of the installation of the system;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Reports of the results of the monitoring which:</text>
      <paragraph num="(a)">
        <text>Shall be performed at least every 60 days, or more frequently as the circumstances may require, and</text>
      </paragraph>
      <paragraph num="(b)">
        <text>May be in the form of an electronic log of the driver's experience with the system;</text>
      </paragraph>
    </paragraph>
    <paragraph num="(3)">
      <text>Within 7 days of discovery, reports of any apparent misuse of the device, tampering, circumventing, or attempts to disconnect, or any other pertinent information; and</text>
    </paragraph>
    <paragraph num="(4)">
      <text>Any other available information upon request.</text>
    </paragraph>
  </paragraph>
</regulation>