<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".02" citation="COMAR 11.14.07.02" title_num="11" subtitle_num="14" chapter_num="07" heading="Definitions.">
  <paragraph num="A.">
    <text>In this chapter, the following terms have the meanings indicated.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Terms Defined.</text>
    <paragraph num="(1)">
      <text>“dB(A)” means the accepted abbreviation for A-weighted sound level in decibels.</text>
    </paragraph>
    <paragraph num="(2)">
      <text>“GCWR” means gross combination weight rating.</text>
    </paragraph>
    <paragraph num="(3)">
      <text>“GVWR” means gross vehicle weight rating.</text>
    </paragraph>
    <paragraph num="(4)">
      <text>“Ground cover” means any various low, dense growing plants, such as ivy, myrtle, low weeds, or brush.</text>
    </paragraph>
    <paragraph num="(5)">
      <text>“Hard test site” means any test site having the ground surface covered with concrete, asphalt, packed dirt, gravel, or similar reflective material for more than 1/2 the distance between the microphone target point and the microphone location point.</text>
    </paragraph>
    <paragraph num="(6)">
      <text>Highway.</text>
      <paragraph num="(a)">
        <text>“Highway” has the meaning stated in Transportation Article, §11-127, Annotated Code of Maryland.</text>
      </paragraph>
      <paragraph num="(b)">
        <text>“Highway” includes any road owned by or under the control of the State or any of its political subdivisions that is open to vehicular traffic and used by the public in general.</text>
      </paragraph>
    </paragraph>
    <paragraph num="(7)">
      <text>“ISO” means the International Organization for Standardization.</text>
    </paragraph>
    <paragraph num="(8)">
      <text>“Lmax” means maximum sound level measurement.</text>
    </paragraph>
    <paragraph num="(9)">
      <text>“SAE” means Society of Automotive Engineers, Inc., or its successor bodies.</text>
    </paragraph>
    <paragraph num="(10)">
      <text>“Soft test site” means any test site having the ground surface covered with grass, other ground cover, or similar absorptive material for 1/2 or more of the distance between the microphone target and the microphone location point.</text>
    </paragraph>
    <paragraph num="(11)">
      <text>“Sound level” means the A-weighted sound level obtained by the use of fast meter response and A-weighting characteristic specified in American National Standard S1.4—1971 “Specification for Sound Level Meters.”</text>
    </paragraph>
  </paragraph>
</regulation>