<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".11" citation="COMAR 11.14.08.11" title_num="11" subtitle_num="14" chapter_num="08" heading="General Requirements for Inspection and Preparation for Inspection">
  <paragraph num="A.">
    <text>Emissions Related Recall. An inspector shall reject from inspection a vehicle which has not had repairs performed as required by an emissions-related recall notice, as specified in Regulation .05C of this chapter.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Vehicle Preparation.</text>
    <paragraph num="(1)">
      <text>Before vehicle inspection, the inspector shall visually check the vehicle for a condition which has potential to cause injury, damage the inspection station or the test equipment, or invalidate the inspection, including, but not limited to:</text>
      <paragraph num="(a)">
        <text>Overheating;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>Leaks of coolant, oil, or fuel;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>Visible tailpipe emissions other than steam; or</text>
      </paragraph>
      <paragraph num="(d)">
        <text>A missing, damaged, or leaking exhaust system.</text>
      </paragraph>
    </paragraph>
    <paragraph num="(2)">
      <text>If an unsafe condition or an exhaust leak is found, the inspector shall reject the vehicle from testing. If an unsafe condition develops during a test, the inspector shall abort the inspection.</text>
    </paragraph>
    <paragraph num="(3)">
      <text>The inspector shall ensure that all vehicle accessories are turned off.</text>
    </paragraph>
  </paragraph>
</regulation>