Certification of compliance with Regulation .05 of this chapter shall be: Documented on letterhead stationery by the manufacturer, second-stage manufacturer, or authorized dealer and shall include, in addition to information required by 49 CFR §§567.4 and 567.5: The lift axle air pressure in pounds per square inch for an axle load of 12,000 pounds when the vehicle is evenly loaded between 65,000 and 70,000 pounds GVW, and The manufacturer's, second-stage manufacturer's, or authorized dealer's license number; and Carried in the vehicle at all times and produced upon the demand of a law enforcement officer. The certification completed by the manufacturer, second-stage manufacturer, or authorized dealer in accordance with the provisions of §A of this regulation shall be submitted to the Motor Vehicle Administration at the time of registration. The owner of a vehicle, when applying for a dump service registration, shall certify that the vehicle shall be operated in compliance with the requirements of these regulations and complies with the provisions of COMAR 11.15.20.05.