<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".04" citation="COMAR 11.22.02.04" title_num="11" subtitle_num="22" chapter_num="02" heading="Steering.">
  <paragraph num="A.">
    <text>Lash. Inspection of vehicles equipped with power steering shall be conducted with the engine running, power steering fluid at the proper level, and belts in proper condition and tension.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Front Wheel Bearings. With front wheels raised, grasp wheel and tire assembly at top and bottom and rock wheel in and out. Wheel bearing movement is determined by movement of brake drum and backing plate or brake disc and shields. Do not confuse suspension or ball joint play with wheel bearing play.</text>
  </paragraph>
  <paragraph num="C.">
    <text>Steering Travel. Turn steering wheel through full right and full left cycle. The vehicle may be slowly moved or the steering wheels raised to ease inspection. Inspect for:</text>
  </paragraph>
  <paragraph num="D.">
    <text>Steering Linkage. Move steering wheel left and right and observe movement in steering components. If the vehicle is equipped with power steering, run the engine. Visually inspect:</text>
  </paragraph>
  <paragraph num="E.">
    <text>Power Steering System. Manually and visually inspect entire system for:</text>
  </paragraph>
  <paragraph num="F.">
    <text>Collapsible Steering Column (if Applicable). Inspect for condition and mounting.</text>
  </paragraph>
</regulation>