<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".10" citation="COMAR 15.01.17.10" title_num="15" subtitle_num="01" chapter_num="17" heading="Sampling and Testing for THC.">
  <paragraph num="A.">
    <text>A licensed grower may request the Department or an authorized agent to collect official samples of hemp for testing under §D of this regulation.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Official Sampling Methodology. To ensure a confidence level of 95 percent that no more than 1 percent of the plants in a lot exceeds the acceptable hemp THC level, official samples collected by the Department or an authorized agent shall be done in accordance with the Department's sampling methodology, which requires that:</text>
    <paragraph num="(1)">
      <text>Samples shall be collected by the Department or an authorized agent;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Samples selected shall be solely determined by the Department or authorized agent;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>Samples shall be from the [flower material of the hemp plant;] flowering tops of plants which shall be approximately 5 to 8 inches in length from:</text>
      <paragraph num="(a)">
        <text>The main stem (that includes the leaves and flowers);</text>
      </paragraph>
      <paragraph num="(b)">
        <text>The terminal bud (that occurs at the end of a stem); or</text>
      </paragraph>
      <paragraph num="(c)">
        <text>The central cola (cut stem that could develop into a bud);</text>
      </paragraph>
    </paragraph>
    <paragraph num="(4)">
      <text>Samples shall represent a homogeneous composition of the lot being collected, and a minimum of two samples from each lot shall be collected (the number of plants selected for sampling will be dependent on the size of the growing area);</text>
    </paragraph>
    <paragraph num="(5)">
      <text>Samples of hemp plant material from one lot may not be commingled with hemp plant material from other lots;</text>
    </paragraph>
    <paragraph num="(6)">
      <text>Samples shall be collected during the growing season and before harvest;</text>
    </paragraph>
    <paragraph num="(7)">
      <text>When a scheduled sampling occurs, the grower or an authorized grower representative shall be present at the growing site;</text>
    </paragraph>
    <paragraph num="(8)">
      <text>The grower shall provide the Department or an authorized agent complete and unrestricted access to all hemp plants and all locations listed in the application;</text>
    </paragraph>
    <paragraph num="(9)">
      <text>The grower or authorized agent shall take any other action that the Department deems necessary to ensure that the stated confidence level is met;</text>
    </paragraph>
    <paragraph num="(10)">
      <text>If the licensed grower fails to complete the harvest within 30 days, a new sample of the lot shall be collected for testing purposes following the procedures set forth in this regulation;</text>
    </paragraph>
    <paragraph num="(11)">
      <text>The Department or authorized agent shall place the composite representative sample in a properly labeled paper bag, seal the bag, and place the following information on the bag or otherwise include it with the sample:</text>
      <paragraph num="(a)">
        <text>License number;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>Name and contact information of the sampling agent;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>Name and contact information of the licensee;</text>
      </paragraph>
      <paragraph num="(d)">
        <text>Date sample was taken;</text>
      </paragraph>
      <paragraph num="(e)">
        <text>Sample identification number for the lot;</text>
      </paragraph>
      <paragraph num="(f)">
        <text>Field identification number listed in the application; and</text>
      </paragraph>
      <paragraph num="(g)">
        <text>Any other information that may be required by the Department; and</text>
      </paragraph>
    </paragraph>
    <paragraph num="(12)">
      <text>The sample and sampling report shall be hand-delivered or placed in a box, sealed with security tape, and shipped overnight to the Department or authorized laboratory.</text>
    </paragraph>
  </paragraph>
  <paragraph num="C.">
    <text>All hemp samples collected become the property of the Department without cost to it and are nonrefundable.</text>
  </paragraph>
  <paragraph num="D.">
    <text>Testing Requirements. The Department or an authorized laboratory shall test hemp for prohibited THC levels by performing a quantitative laboratory determination of the total delta-9 THC concentration on a dry weight basis. In conducting this work, the following standards shall be met:</text>
    <paragraph num="(1)">
      <text>Laboratory quality assurance shall ensure the quality and validity of the test results and that the testing method used is appropriate;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>An appropriate chain of custody shall be maintained at all times;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>The official samples shall be dried, the stem and seed shall be separated from floral material and discarded, and the floral material shall be ground;</text>
    </paragraph>
    <paragraph num="(4)">
      <text>The ground floral material shall be tested for THC content;</text>
    </paragraph>
    <paragraph num="(5)">
      <text>The THC testing procedure shall include a valid testing methodology that uses post-decarboxylation or other similarly reliable methods, including, but not limited to, gas chromatography with flame ionization detection, or liquid chromatography with ultraviolet detection (The testing methodology shall consider the potential conversion of THCA in hemp into THC and the test result shall measure total available THC derived from the sum of the THC and THC-A content. The total THC concentration level shall be determined and reported on a dry weight basis. MU shall be used in determining the range of the result found.); and</text>
    </paragraph>
    <paragraph num="(6)">
      <text>A sample test result with a delta-9 THC concentration on a dry weight basis greater than the acceptable hemp THC level is conclusive evidence that the lot represented by the sample contains a delta-9 THC concentration on a dry weight basis of more than 0.3 percent and that the hemp is therefore not in compliance with this chapter.</text>
    </paragraph>
  </paragraph>
  <paragraph num="E.">
    <text>Test Results Report. If an authorized laboratory conducts the testing, the hemp grower shall direct the laboratory to report the test results for all samples tested to the Department and USDA. The test results report shall contain the information below for each sample tested:</text>
    <paragraph num="(1)">
      <text>Hemp grower's license or authorization identifier;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Name of hemp grower;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>Business address of hemp grower;</text>
    </paragraph>
    <paragraph num="(4)">
      <text>Lot identification number for the sample;</text>
    </paragraph>
    <paragraph num="(5)">
      <text>Name and address of laboratory;</text>
    </paragraph>
    <paragraph num="(6)">
      <text>Date of test and report;</text>
    </paragraph>
    <paragraph num="(7)">
      <text>Identification of a retest; and</text>
    </paragraph>
    <paragraph num="(8)">
      <text>Test result.</text>
    </paragraph>
  </paragraph>
</regulation>