<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".10" citation="COMAR 15.03.11.10" title_num="15" subtitle_num="03" chapter_num="11" heading="Examination of Testing Equipment.">
  <paragraph num="A.">
    <text>At least once every two calendar years, each registered service agency and registered service technician shall submit for examination and certification all standards, except for those noted in §B of this regulation, that are used or intended to be used for servicing and testing commercial weighing and measuring devices for which competence is registered to one of the following locations:</text>
    <paragraph num="(1)">
      <text>The Department;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>NIST; or</text>
    </paragraph>
    <paragraph num="(3)">
      <text>A NIST-approved out-of-State weights and measures laboratory.</text>
    </paragraph>
  </paragraph>
  <paragraph num="B.">
    <text>Once every calendar year, each registered service agency and registered service technician shall submit for examination and certification the following standards that are used or intended to be used for servicing and testing commercial weighing or measuring devices for which competence is registered to one of the locations referenced in §A of this regulation:</text>
    <paragraph num="(1)">
      <text>Cast iron hand weights;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Self-propelled weight carts; and</text>
    </paragraph>
    <paragraph num="(3)">
      <text>Five-gallon test measures.</text>
    </paragraph>
  </paragraph>
  <paragraph num="C.">
    <text>If a registered service agency or registered service technician submits standards to NIST or a NIST-approved out-of State weights and measures laboratory, as described in §§A and B of this regulation, the service agency or service technician within 30 days shall provide the Department a copy of the current certification of all standards used in the repair, service, or testing of weighing or measuring devices in Maryland.</text>
  </paragraph>
  <paragraph num="D.">
    <text>A registered service agency or registered service technician may not use, in servicing commercial weighing or measuring devices, any standards that have not been certified by a NIST-approved State metrology laboratory. A registered service agency or service technician immediately shall submit to a NIST-approved laboratory for recertification a damaged standard.</text>
  </paragraph>
  <paragraph num="E.">
    <text>A registered service agency or registered service technician that places into service a scale with a capacity in excess of 40,000 pounds shall have test weights that are:</text>
    <paragraph num="(1)">
      <text>Certified by one of the three locations outlined in §A of this regulation; and</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Equal to a minimum of 12.5 percent of the scale's nominal capacity, or 10,000 pounds, whichever is greater.</text>
    </paragraph>
  </paragraph>
</regulation>