<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".06" citation="COMAR 20.50.02.06" title_num="20" subtitle_num="50" chapter_num="02" heading="Life-Cycle Cost Analysis to Guide the Purchase of Liquid-Immersed Distribution Transformers.">
  <paragraph num="A.">
    <text>Scope. This regulation does not apply to an electric cooperative that supplies electricity to fewer than 60,000 electric meters in the State.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Purchase of Liquid-Immersed Distribution Transformers.</text>
    <paragraph num="(1)">
      <text>Beginning January 1, 2009, a utility shall use the life-cycle cost methodology contained in NEMA Standards Publication TP 1-2002, which is incorporated by reference under COMAR 20.50.02.02, when selecting any liquid-immersed distribution transformer for purchase.</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Evaluation of Distribution Transformer Models.</text>
      <paragraph num="(a)">
        <text>Within each capacity class or type of liquid-immersed distribution transformer, a reasonable number of commercially available models shall be evaluated, and, except as provided §B(2)(b) of this regulation, a utility shall select for purchase the model in each capacity class or type with the lowest total owning costs as determined by the life-cycle cost methodology.</text>
      </paragraph>
      <paragraph num="(b)">
        <text>If a utility is soliciting bids to supply multiple capacity classes or types of liquid-immersed distribution transformers under a single contract, models offered by a supplier in more than one capacity class or type may be combined for purposes of life-cycle cost evaluation.</text>
      </paragraph>
      <paragraph num="(c)">
        <text>A utility shall select for purchase the aggregation of models offered by a supplier in the combined classes or types with the lowest total owning cost as determined by the life-cycle cost methodology in §B(2)(b) of this regulation.</text>
      </paragraph>
      <paragraph num="(d)">
        <text>Under this section, a utility shall use:</text>
        <paragraph num="(i)">
          <text>The values for load losses and no-load losses as determined by the “Uniform Test Method for Measuring the Energy Consumption of Distribution Transformers”, Appendix A to Subpart K of 10 CFR Part 431, as amended, which is incorporated by reference; and</text>
        </paragraph>
        <paragraph num="(ii)">
          <text>The estimated value of energy and capacity from the most current year available at the time of any bid solicitation.</text>
        </paragraph>
      </paragraph>
    </paragraph>
  </paragraph>
  <paragraph num="C.">
    <text>This regulation does not require a utility to purchase any liquid-immersed distribution transformer that fails to meet federal energy efficiency standards specified in 10 CFR Part 431, as amended, which is incorporated by reference.</text>
  </paragraph>
  <paragraph num="D.">
    <text>Each utility shall keep sufficient records to give evidence of compliance with this regulation.</text>
  </paragraph>
</regulation>