<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".43" citation="COMAR 26.04.06.43" title_num="26" subtitle_num="04" chapter_num="06" heading="Marginal Land — Permit Application Requirements.">
  <paragraph num="A.">
    <text>A person shall submit to the Department a separate Sewage Sludge Utilization Permit Application for each site where sewage sludge is to be applied on a marginal land, subject to the following:</text>
    <paragraph num="(1)">
      <text>Adjacent properties owned and operated by separate persons shall be considered as separate sites; and</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Nonadjacent parcels of land that are owned or operated by the same person, as evidenced by a farm plan or other documentation acceptable to the Department, may be considered a single site if the distance between the parcels is 3 miles or less.</text>
    </paragraph>
  </paragraph>
  <paragraph num="B.">
    <text>A person shall submit to the Department six completed copies of the Sewage Sludge Utilization Permit Application on a form provided by the Department. A person shall also submit a performance bond, liability insurance, or other form of security required under the provisions of Regulation .10 of this chapter.</text>
  </paragraph>
  <paragraph num="C.">
    <text>The Sewage Sludge Utilization Permit Application to apply sewage sludge on a marginal land shall include six completed copies of the owner’s consent form provided by the Department completed and signed by the legal owners of the site where sewage sludge is to be applied and dated not more than 6 months before the receipt of the Sewage Sludge Utilization Permit Application by the Department.</text>
  </paragraph>
  <paragraph num="D.">
    <text>The Sewage Sludge Utilization Permit Application to apply sewage sludge on a marginal land shall include six completed copies of the following information:</text>
    <paragraph num="(1)">
      <text>The sources and types of sewage sludge to be applied, including any treatment the sewage sludge has received, such as anaerobic digestion, aerobic digestion, lime stabilization, composting, or dewatering;</text>
    </paragraph>
    <paragraph num="(2)">
      <text>A current site specific topographic map with a minimum scale of 1 inch = 200 feet and a contour interval of not more than 5 feet showing the areal extent of the site, the property boundary lines, fields boundaries, and the proximity of the site to major roads in the area and any roads on the site;</text>
    </paragraph>
    <paragraph num="(3)">
      <text>A current site plan that includes:</text>
      <paragraph num="(a)">
        <text>The location of property boundary lines and field boundaries;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>The exact acreage where sewage sludge is to be applied;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>The location of all buffer distances;</text>
      </paragraph>
      <paragraph num="(d)">
        <text>The location of any residences or buildings on site or within 1/2 mile of the site;</text>
      </paragraph>
      <paragraph num="(e)">
        <text>An inventory of any domestic, commercial, or municipal wells on site and within 1/2 mile of the property boundary lines, including water level for the wells if available;</text>
      </paragraph>
      <paragraph num="(f)">
        <text>The location of any on-site stream, spring, seep, pond, drainage ditch or other body of water;</text>
      </paragraph>
      <paragraph num="(g)">
        <text>The location of any on-site area with a slope of 15 percent or greater;</text>
      </paragraph>
      <paragraph num="(h)">
        <text>The location of any on-site bedrock outcropping;</text>
      </paragraph>
      <paragraph num="(i)">
        <text>The location of any on-site depression area;</text>
      </paragraph>
      <paragraph num="(j)">
        <text>The surrounding land uses;</text>
      </paragraph>
      <paragraph num="(k)">
        <text>The location of cation exchange capacity tests and pH testing of the soil;</text>
      </paragraph>
      <paragraph num="(l)">
        <text>The location of all soil tests, and the location of all soil borings or test pits on the site;</text>
      </paragraph>
      <paragraph num="(m)">
        <text>Other features as determined by the Department; and</text>
      </paragraph>
      <paragraph num="(n)">
        <text>A legend identifying the key features on the site plan;</text>
      </paragraph>
    </paragraph>
    <paragraph num="(4)">
      <text>Representative analysis of the pH of the soils;</text>
    </paragraph>
    <paragraph num="(5)">
      <text>A description of representative test borings or test pits on the site including a description of the texture of the soils encountered and the depth to the groundwater;</text>
    </paragraph>
    <paragraph num="(6)">
      <text>Unless the analytical results have been submitted to the Department in accordance with the requirements of Regulation .06 of this chapter, the most recent results of a laboratory analysis of a representative composite sample of the sewage sludge that was obtained from the wastewater treatment plant that generated the sewage sludge, subject to the following requirements:</text>
      <paragraph num="(a)">
        <text>The sample was obtained in accordance with the requirements of Regulation .06 of this chapter;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>The analysis of the sample was performed by an independent laboratory or other laboratory acceptable to the Department, using standards, procedures, and methods that are acceptable to the Department;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>If requested by the Department, the results shall be accompanied by a description of the method or methods of analysis; and</text>
      </paragraph>
      <paragraph num="(d)">
        <text>The analytical results include, at a minimum:</text>
        <paragraph num="(i)">
          <text>Percent of total solids, pH, ammonium nitrogen, nitrate nitrogen, total phosphorous, total potassium, total arsenic, total cadmium, total copper, total lead, total mercury, total molybdenum, total nickel, total selenium, total zinc, polychlorinated biphenyls (PCBs), and the dry weight concentration of total Kjeldahl nitrogen; and</text>
        </paragraph>
        <paragraph num="(ii)">
          <text>Any other sewage sludge constituent that the Department determines necessary to adequately assess the potential impact of the project on public health and the environment;</text>
        </paragraph>
      </paragraph>
    </paragraph>
    <paragraph num="(7)">
      <text>A loading calculation per acre for the sewage sludge proposal;</text>
    </paragraph>
    <paragraph num="(8)">
      <text>Sediment and erosion control provisions approved by the appropriate approving authority;</text>
    </paragraph>
    <paragraph num="(9)">
      <text>The type of crop to be grown with a calculation of the amount of seed mixture to be used per acre, the proposed optimal soil pH for the type of crop to be grown, and the desired yield of the crop;</text>
    </paragraph>
    <paragraph num="(10)">
      <text>A tax map showing the property line, owner, acreage, and liber and folio numbers;</text>
    </paragraph>
    <paragraph num="(11)">
      <text>A detailed operation plan that includes, when applicable:</text>
      <paragraph num="(a)">
        <text>Procedures for sampling, record keeping, and reporting of the sewage sludge to be utilized;</text>
      </paragraph>
      <paragraph num="(b)">
        <text>Types of equipment to be used for collection, management, washdown, and other operations;</text>
      </paragraph>
      <paragraph num="(c)">
        <text>Days and hours of operation;</text>
      </paragraph>
      <paragraph num="(d)">
        <text>Methods and procedures to prevent or control odors and other potential nuisance conditions at the site;</text>
      </paragraph>
      <paragraph num="(e)">
        <text>Methods and procedures for utilizing the treated sewage sludge;</text>
      </paragraph>
      <paragraph num="(f)">
        <text>Contingency or emergency plans to manage equipment breakdown, spills, and other emergency events; and</text>
      </paragraph>
      <paragraph num="(g)">
        <text>Methods and procedures for restricting public access to the site;</text>
      </paragraph>
    </paragraph>
    <paragraph num="(12)">
      <text>Future use of the site; and</text>
    </paragraph>
    <paragraph num="(13)">
      <text>Other information that may be requested by the Department.</text>
    </paragraph>
  </paragraph>
  <paragraph num="E.">
    <text>The Department may reject an analysis of a sewage sludge sample submitted in accordance with §D(6) of this regulation and require retesting and resubmittal of results if the Department determines that the method of analysis is inaccurate, or for any other good cause.</text>
  </paragraph>
  <paragraph num="F.">
    <text>Permit Application Fees.</text>
    <paragraph num="(1)">
      <text>A person shall pay the Department a nonrefundable Sewage Sludge Utilization Permit Application fee in accordance with the following schedule:</text>
      <paragraph num="(a)">
        <text>For a Permit Application, $350; and</text>
      </paragraph>
      <paragraph num="(b)">
        <text>For a renewal permit application, $350.</text>
      </paragraph>
    </paragraph>
    <paragraph num="(2)">
      <text>For activities which involve transportation of sewage sludge in combination with any other activities listed in the Sewage Sludge Utilization Permit Application, the Department will issue a single Sewage Sludge Utilization Permit to include all activities. For combined activities, only the application fee listed for transportation of sewage sludge in Regulation .23C of this chapter shall be waived.</text>
    </paragraph>
  </paragraph>
</regulation>