<?xml version='1.0' encoding='utf-8'?>
<regulation prefix="Regulation" num=".24" citation="COMAR 26.11.19.24" title_num="26" subtitle_num="11" chapter_num="19" heading="Control of VOC Emissions from Leather Coating.">
  <paragraph num="A.">
    <text>Applicability. This regulation applies to a person who owns or operates a leather coating operation at a premises with actual VOC emissions of 20 pounds or more per day from all leather coating operations at the premises.</text>
  </paragraph>
  <paragraph num="B.">
    <text>Definition. In this regulation, “leather coating” means the application of a coating to leather or the impregnation of a coating into leather to beautify, protect, or give a finished appearance or quality to the leather.</text>
  </paragraph>
  <paragraph num="C.">
    <text>VOC Emission Requirements.</text>
    <paragraph num="(1)">
      <text>Coating Standards. Except as provided in §C(2) of this regulation, a person subject to this regulation may not use any coating in leather coating that exceeds 3.5 pounds of VOC per gallon of coating applied minus water and exempt solvents.</text>
    </paragraph>
    <paragraph num="(2)">
      <text>Alternative Method of Compliance. A person subject to this regulation may achieve compliance with the requirements in §C(1) of this regulation by installing a control device that reduces total VOC emissions by 85 percent or more, overall.</text>
    </paragraph>
  </paragraph>
  <paragraph num="D.">
    <text>Testing and Record Keeping.</text>
    <paragraph num="(1)">
      <text>Compliance Demonstration. A person subject to this regulation shall demonstrate compliance by one of the following methods:</text>
      <paragraph num="(a)">
        <text>If complying coatings are used to achieve compliance, submit to the Department by not later than September 1, 1997, a list of all coatings used, demonstrating compliance with §C(1) of this regulation; or</text>
      </paragraph>
      <paragraph num="(b)">
        <text>If a control device is used to achieve compliance, perform a stack test by not later than September 1, 1997, and every 3 years thereafter, demonstrating compliance with §C(2) of this regulation.</text>
      </paragraph>
    </paragraph>
    <paragraph num="(2)">
      <text>Reporting Requirements.</text>
      <paragraph num="(a)">
        <text>If complying coatings are used to achieve compliance, monthly records shall be maintained showing the total volume of each coating used and the total premises VOC emissions.</text>
      </paragraph>
      <paragraph num="(b)">
        <text>If a control device is used to achieve compliance, a report of the compliance test required by §D(1)(b) of this regulation shall be submitted to the Department not later than 60 days after the date that the test is completed.</text>
      </paragraph>
      <paragraph num="(c)">
        <text>Required records shall be maintained at the premises for a period of not less than 3 years and made available to the Department upon request.</text>
      </paragraph>
    </paragraph>
  </paragraph>
</regulation>