A person who manufactures a coating subject to this chapter shall provide within 180 days of written request, data concerning the distribution and sales of architectural coatings, including: The name and mailing address of the manufacturer; The name, address, and telephone number of a contact person; The name of the coating product as it appears on the label; The application coating category; A description whether the product is marketed for interior or exterior use or both; The number of gallons sold in the State in containers greater than 1 liter and equal to or less than 1 liter; The VOC actual content and VOC regulatory content in grams per liter. If thinning is recommended, list the VOC actual content and VOC regulatory content after maximum recommended thinning. If containers less than 1 liter have a different VOC content than containers greater than 1 liter, list separately. If the coating is a multi-component product, provide the VOC content as mixed or catalyzed. The names and CAS numbers of the VOC constituents in the product; The names and CAS numbers of any compounds in the product specifically exempted from the VOC definition under COMAR 26.11.01.01B(53); A description whether the product is marketed as solventborne, waterborne, or 100 percent solids; A description of resin or binder in the product; A description whether the coating is a single-component or multi-component product; The density of the product in pounds per gallon; The percent by weight of solids, all volatile materials, water, and any compounds in the product specifically exempted from the VOC definition under COMAR 26.11.01.01B(53); and The percent by volume of solids, water, and any compounds in the product specifically exempted from the VOC definition under COMAR 26.11.01.01B(53).