A hazardous waste generator who is accumulating hazardous waste in a tank without authorization provided by a permit or interim status shall comply with all provisions of this regulation and the requirements of Regulation .03-10B of this chapter. A person subject to this regulation shall: Comply with the requirements of: COMAR 26.13.05.10A and C—E, .10-1, .10-2, .10-6A, and COMAR 26.13.06.18D(1)—(3); COMAR 26.13.05.10-3B, except that the person need not obtain approval by the Department of the written assessment required by COMAR 26.13.05.10-3B(1) before managing hazardous waste in the tank system; COMAR 26.13.05.10-4; and All applicable requirements of Subparts AA, BB, and CC of 40 CFR Part 265 unless the generator qualifies for the exemption that is available under Regulation .01-1D(4) of this chapter to certain persons who qualify as a federally-defined small quantity generator. Inspect overfill controls at least once each operating day; Maintain an inspection log or summary in accordance with the following: The log or summary documents inspections performed in accordance with §B(2) of this regulation and COMAR 26.13.05.10D; The log or summary includes the date and time of each inspection, the name of the inspector, a notation of the observations made, and the date and nature of any repairs made or other remedial actions taken; and The generator keeps the log on file for a minimum of 3 years from the date of inspection; Use inventory logs, monitoring equipment, or other records to demonstrate that: If using a batch process, hazardous waste has been emptied within 90 days of first entering the tank or by an alternate deadline established under Regulation .03-4C(1) or C(3) of this chapter; and If using a continuous flow process, the volumes of hazardous waste that are estimated to be entering the tank each day are exiting the tank within 90 days of first entering the tank or by an alternate deadline established under Regulation .03-4C(1) or C(3) of this chapter; Keep inventory logs or records with the information required by §B(4) of this regulation on site and available for inspection; Submit to the Department, by the deadline specified in §B(7) of this regulation, the following information for each tank being used to accumulate hazardous waste: Date of installation of the tank, or, if the date of installation is unknown, the age of the facility; Tank capacity; Secondary containment capacity; Whether the tank is an above-ground tank, on-ground tank, in-ground tank, or underground tank; For underground tanks, whether the tank can be entered for inspection; and Waste code of each waste managed in the tank; and Provide the information required by §B(6) of this regulation by the following deadlines: For an existing tank system, as defined in COMAR 26.13.01.03B by January 1, 1994; For a new tank system, as defined in COMAR 26.13.01.03B, before the tank is used to manage hazardous waste.