In addition to complying with the requirements of Regulation .02 of this chapter, a person seeking a CHS facility permit to manage hazardous waste in containers shall provide the Secretary with the specific information required by §§B and C of this regulation. For facilities that store containers of hazardous waste, except as otherwise provided in COMAR 26.13.05.09, the permit applicant shall provide the following information: A description of the containment system to demonstrate compliance with COMAR 26.13.05.09H which includes at least the following: Basic design parameters, dimensions, and materials of construction; A description of how the design promotes drainage or how containers are kept from contact with standing liquids in the containment system; Capacity of the containment system relative to the number and volume of containers to be stored; A description of provisions for preventing or managing run-on; and A description of how accumulated liquids can be analyzed and removed to prevent overflow; Sketches, drawings, or data demonstrating compliance with COMAR 26.13.05.09F, concerning location of buffer zone and containers holding ignitable or reactive wastes, and COMAR 26.13.05.09G(3), concerning location of incompatible wastes, if applicable; and If incompatible wastes are stored or otherwise managed in containers, a description of the procedures used to ensure compliance with COMAR 26.13.05.02H(2) and (3) and 26.13.05.09G(1) and (2). For storage areas that store containers holding wastes that do not contain free liquids the permit applicant shall demonstrate compliance with COMAR 26.13.05.09H(4), including: Test procedures and results or other documentation or information to show that the wastes do not contain free liquids; and A description of how the storage area is designed or operated to drain and remove liquids or how containers are kept from contact with standing liquids.